By Tom Kuntzleman, Tori Talaski and Charles Schaerer
There is a new experiment circulating the web. Check it out:
Isn’t that cool? The juice from an orange peel causes a balloon to pop. When I first saw this effect I immediately thought to myself, “what is the chemistry involved in this experiment?” After quickly searching the web, I found several claims that a compound in orange peels called limonene (Figure 1) is responsible for this effect. Limonene is a hydrocarbon, which means that molecules of limonene are composed of only carbon and hydrogen atoms. Limonene is responsible for the wonderful smell of oranges, and it is a liquid at room temperature.
Figure 1 - Chemical structure of limonene
Because limonene is a hydrocarbon and hydrocarbons are non-polar molecule, one would expect limonene to be non-polar.
So what does all this chemical information have to do with balloons popping when squirted with orange peel juice? Well, balloons are made primarily of rubber. Like limonene, rubber is a hydrocarbon (Figure 2), so it’s non-polar as well. It is well known by chemists that non-polar substances dissolve well in other non-polar substances (we like to say that “like dissolves like”). Therefore, when the limonene oil contacts the surface of a balloon, some of the rubber balloon dissolves in the limonene. This weakens the balloon, causing it to pop.
Figure 2 - Chemical structure of rubber (chemical name: cis-poly isoprene). The pattern of atoms seen here is repeated hundreds of times over to make a very long molecule called a polymer.
We wanted to test this claim that limonene oil is responsible for balloons popping. So we extracted some limonene oil from orange peels using a procedure published in the Journal of Chemical Education. Sure enough, limonene placed onto a balloon causes it to pop:
Interestingly, we have observed that not all balloons pop when squirted with an orange peel:
Why is it that some balloons pop in this experiment, while others do not? It has to do with chemistry, of course! The cis-poly isoprene molecules in rubber are very long molecules called polymers (see Figure 2 again). In natural rubber, these long molecular strands can readily separate from one another. Because of this molecular property, it is easy to get rubber to break into pieces or to dissolve in various solvents. This property of rubber can be changed through a process called vulcanization. During vulcanization, rubber is treated with sulfur. Vulcanization causes polymer strands to become connected by sulfur atoms (Figure 3) in what is called a cross-link. While the chemistry involved is more complex than indicated in the figure, the effect of vulcanization on rubber makes it very difficult for polymer molecules to separate from one another. Because of this, vulcanized rubber is tougher to break apart and more difficult to dissolve than normal rubber.
Figure 3 - Simplified structure of cross-linked rubber. The red arrow identifies a cross-link between two polymer strands.
Now that you know a bit about the chemistry of balloons, I think you might be able guess which balloons pop when squirted with the juice from an orange peel, and which balloons do not. Most balloons are made of vulcanized rubber1, presumably to keep them from breaking easily when stretched. When a balloon made of vulcanized rubber is squirted with limonene or an orange peel, it doesn’t break. Water balloons are not made of vulcanized rubber1, because people generally want these balloons to be somewhat breakable. Because of this difference in its chemistry, a water balloon pops when squirted with limonene or orange peel juice!
We are interested to learn what types of easy-to-find, non-polar liquids can be used to cause balloons to pop. Curiously, we have tested acetone and found that it does not cause the balloons to pop. If you find some fluids that cause balloons to pop, please let us know. Also, if anyone has comments on our interpretation of the chemistry presented herein, we welcome your insights!
1. Evidence for these claims was gained by taking infrared (IR) spectra of balloons. Peaks were consistently observed at 670cm-1 (indicative of a C-S bond and therefore vulcanization) and 1010 cm-1 in the IR spectra of pop-resistant balloons. However, both of these peaks were consistently absent in the IR spectra of balloons that pop when treated with non-polar compounds.
EDITOR'S NOTE - Laura Wang has expanded Tom’s work by creating a QFT Task Student Handout, a Balloon Lab Design Proposal as well as a rubric (for the audience and the teacher) for the group presentation she assigns her students. Read her 8/2017 blog post, Mini-Project Sequence: Orange Peels and Polarity.
All comments must abide by the ChemEd X Comment Policy, are subject to review, and may be edited. Please allow one business day for your comment to be posted, if it is accepted.
Update on this experiment
We have captured slow motion video of a water balloon (filled with water) popping after being squirted with juice from an orange peel. Interestingly, it appears that water escapes from tiny holes in the balloon prior to the balloon popping. I think this indicates that tiny droplets of the orange peel juice land on the balloon in different regions. These droplets, which contain limonene, dissolve small portions of the balloon, allowing water to escape. Is there anything else you can see going on in this video?
This widen my understanding
This widen my understanding and answers the questions that I have in my mind. I can now make my project.Thanks you for having a discussion right here. I appreciate your efforts. Student like me appreciate this so much.
Comments from David Allan
I recently received the following email from David Allan regarding this experiment. He was having trouble posting his comments, so I will share them with you here:
I came across this article in my news feed and thought of your experiment. The findings don't change any of your conclusions, but may add some nice background information when performing the demonstration. I don't know if this is the original link I found, but it shows what I wanted to share with you: http://www.sciencemag.org/news/2017/01/video-reveals-why-there-s-no-clean-way-peel-orange
David S. Allan
Saginaw Arts & Sciences Academy
question about why balloon pop when we squeeze orange peel
what is the reason that balloon also burst when we added drop of nitric acid and sulphuric acid they are not organic in nature
Thank you for your question, and also for sharing your interesting observations. I'm not sure what accounts for your observations. My hunch is that nitric and sulfuric acid dissolvie the rubber membrane of the balloon. Indeed, I did a bit of internet searching, and it looks as though some acids, including nitric and sulfuric, will dissolve some types of rubber under certain conditions.
I'd like to try to repeat your experiment. Would you mind letting me know what concentration of each acid you added to the balloons?
Thanks again for sharing and for your question!
Is this experiment a chemical change?
I have been searching what is the product from this reaction. Many websites state this is a chemical reaction: Limonene reacts/dissolves rubber, but dont mention why this is a chemical reaction. Can you help me with this? Thanks in advance!
I'm guessing it's physical...
Hi Angelica, thank you for your question. My understanding is that this is a physical change, with the compound(s) in the balloon dissolving in the limonene.